DUAL ELECTRONICS CORPORATION XD18BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the pair code for dual xd18bt? ›

The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.

What are pairing codes? Pairing codes are secure, unique codes that allow you to sync app access across multiple devices. They are handy because they save you the trouble of manually logging in on each device, and the process is also a lot faster.

The Dual-device connection allows you to connect your earphone with two different devices via Bluetooth, and seamlessly switch between the two devices for listening to music and watching movies.

Devices without a reset button

Depending on your car stereo, press DSPL and (back) /MODE, DSLP and CALL button, or SOURCE/OFF button for more than two seconds.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

Enabling Dual Audio: Go to Settings > Connections > Bluetooth. Tap on More options (the three vertical dots) > Advanced, and then enable Dual audio. If asked, disable Media volume sync. Volume Control: On Android 9, the volume for both devices adjusts simultaneously with the phone's volume keys.

If you don't have the manual, set a passkey from your infotainment system's phone settings menu. And if that doesn't work, your local dealer may be able to provide you with the original passkey. Many Bluetooth devices use "1234," "1111," and other simple passkeys by default.

Option 3: Chain-Connected Bluetooth Transmitters

But in this situation, you may replace the sound bar or AVR with another transmitter, resulting in both transmitters functioning at the same time. Each transmitter can connect up to TWO pairs or Bluetooth headphones, so two transmitters can connect up to FOUR pairs…

What is the 4 digit PIN for Bluetooth? ›

the 4 digit pin is usually default to 0000 or 1111. If pairing, it can also be anything you choose, providing that you enter the same 4 digits into both items to pair.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

In the vast majority of devices with PINs they are set to 0000 or 1234. Other than that you would have to learn it from the manufacturer. Your android device will not have the saved PIN anywhere because PIN is used only temporarily during pairing procedure, then other outputs (keys) are saved for future connections.

Usually, passwords for JBL headphones are 0000, but you can also find that number located in the manual. Once connected, you'll hear "BT connected" from the earbuds. To disconnect, tap and hold your finger on the back of an earbud for about 5 seconds.

Once the “in. stream 2” has been detected by your device, select it to initiate the pairing process. When asked for a password, type in “5555” to complete the pairing. Once paired, the devices can connect together.